home
store
brush rag
oiler
airaudio
shipping
reviews
tech tips
contact
dealers
greasespots
Ninja of the Month

The GreaseNinja Oiler
A Motorcycle & Bike Chain Oiler that Works!

The GreaseNinja Oiler The leading cause of accelerated drive chain and sprocket wear is lack of lubrication. Chain oiling is a time consuming and messy chore. Application of chain oil with GreaseNinja Chain Oiler is easy, safe, and fast. The GreaseNinja Chain Oiler has internal porting designed for your drive chain size and places your aerosol lubricant in the correct areas, resulting in a significantly reduced mess and waste. Its size is especially perfect for those motorcycles with very little exposed chain. The GreaseNinja is virtually indestructible and works with the stickiest of chain lubricants. The spray ports are easy to clean. The price is only $15.00 plus shipping. Note: Lubricant Not Included
Chain Oiler Application Steps
The engine must be turned off.
1) Raise the rear wheel(s) off the ground—if bicycle, allow for backpedaling without interference.
2) Expand the retaining wire around aerosol can.
3) Place spray tube hose in GreaseNinja and aerosol lubricant nozzle. For best results, the spray tube should come ‘horizontal’ out of the aerosol can nozzle.
4) Place the Grease Ninja on the drive chain.
5) Slowly move chain through Grease Ninja by rotating the tire or backpedaling, and dispense lubricant.

Motorcycle Chain Oiling

Bicycle Chain Oiling

  • Attach GreaseNinja and spray tube

  • GreaseNinja on Chain

  • rotate tire / Dispense Lube

  • GreaseNinja on Chain Back pedal

  • Attach GreaseNinja and Spray tube

  • Place Paper Towel under chain

Have limited access to your chain due to exhaust pipes, swing arm, etc?
Consider the GN Spray Tube Kit

The Kit includes:
• one 4" 90 degree tube
• three additional 8" tubes
• two rigid tube connectors
• two heat-strink tube connectors.

The right angle red tube may come in handy when access to the chain is restricted. Insert the short end of the red tube into the GreaseNinja and use the 1” connectors to ‘connect to the shortened spray tube. This will allow the spray tube to come straight to the aerosol can nozzle without severely bending the spray tube.

For best results, the spray tube should come ‘horizontal’ out of the aerosol can nozzle. This can be accomplished by moving the retaining wire 'down' the aerosol can.
The 1” connectors help with connecting the GreaseNinja spray tube to other manufacturers lubes that are no longer standard…we know of REPSOL, Mannol, Motorex, Motul, DuPont Teflon, Wurth, Maxima, Silkolene, and WD40. Use the Aerosol Manufacturers' spray tube in the can nozzle and use the 1" connector to 'connect' to the GreaseNinja spray tube. Click Here to Find Out How to Get a Free Spray Tube Kit
Available Standard Chain Sizes The GreaseNinja is designed for these Chain Sizes with or without Orings, Xrings, Zrings. Custom Chain sizes are available on request. Chain Sizes: Size 219 select GN219 Size 428 select GN428/520 Size 530 select GN525/530 Size 415 select GN415/420 Size 520 select GN428/520 Size 630 select GN630 Size 420 select GN415/420 Size 525 select GN525/530 Bicycle Chain select GN10B Note: Usually your chain size is stamped on every 5th or 6th chain link plate Don't know your chain size...contact us, we can help.
Made in the United States of America
U.S. Patent 9,079,720 B1
About Us
GreaseNinja Oiler is protected by U.S. Patent 9,079,720 B1 GreaseNinja Brush Rag and AirAudio are Patent Pending
Address
GreaseNinja P.O.Box 153 3300 Saint Peters Road Saint Peters PA 19470-9998 USA
Contact
Winter Hours of Operation Monday through Friday 9:00 a.m. to 5:00 p.m.
Follow Us
Facebook
Copyright © All rights reserved.