A Breakthrough In The Way You Clean Your Drive Chain Saving You Time And Money! The GreaseNinja B-Rag®
With the GreaseNinja ‘B-Rag® chain cleaning is no longer the most tedious and messy chore of motorcycle maintenance. The ‘Brush Rag’ is a disposable, flexible brush specifically designed for cleaning the motorcycle drive chain with kerosene or other chain cleaners. The B-Rag is approximately 5” x 5” in size with a hand strap on the back of the brush. The ‘Brush Rag’ consists of flat bristles on a flexible backing, allowing it to be ‘wrapped’ 360 degrees around the drive chain for efficient chain cleaning. When the cleaning process is completed, the ‘Brush Rag’ is easily cleaned or discarded. A B-Rag is usually discarded after three chain cleanings. The B-Rag is available in Paks of five (5) at $10.00/Pak and also in combination with a GreaseNinja Oiler.
the innovative GreaseNinja B-Rag®The ‘Brush Rag’ Advantages over conventional chain brushes: 1) Bristle contact is 360 degrees around the chain, eliminating the need to re-position the brush to clean all sides of the chain. 2) Bristle pressure is easily controlled by the direct ‘tactical’ sensing by holding and squeezing of the Brush Rag’ around the chain for cleaning. 3) Debris being removed from the chain is captured in the brush bristles eliminating ‘flinging’ of the grit & grime particles and cleanup of the motorcycle and surrounding area. 4) The ‘Brush Rag’ provides a ‘catch basin’ when held under the chain during the application of cleaner, minimizing overspray, waste and cleanup. Total time for chain cleaning is drastically reduced. 5) The ‘Brush Rag’ is quickly cleaned with a cloth of chain grit and grime during the cleaning process. When the chain cleaning process is completed, the ‘Brush Rag’ is cleaned by wiping bristles with a cloth and left to dry.
The GreaseNinja B-rag®-U.S. Patents PendingChain Cleaning Application Steps with the ‘Brush Rag’ If you are cleaning a motorized vehicle drive chain, IMPORTANT – MOTORCYCLE ENGINE MUST BE OFF
1. Place Motorcycle on center stand or jack to raise rear wheel 2. Slip Brush Rag onto Hand and place under portion of chain to be cleaned a. Lay paper under chain area to be cleaned for potential cleaner drippings
Doesn't Waste Cleaning Solvent!Chain Cleaning Application Steps with the ‘Brush Rag’ 3. Spray chain cleaner or K1 Kerosene onto chain, using Brush Rag to catch overspray a. No need for cardboard masking of the motorcycle and surrounding area.
Chain cleaning Time is Drastically reducedChain Cleaning Application Steps with the ‘Brush Rag’ 4. Close hand to wrap Brush Rag around the chain a. Move Brush Rag back and forth over chain until chain debris is removed b. Grip as required to increase / decrease brush pressure 5. Reposition Brush Rag to next portion of chain to be cleaned. Wipe Brush Rag with cloth as required to remove debris. Repeat Steps 3, 4 and 5 until entire chain has been cleaned. 6. Dry off chain with clean cloth rag
Care of ‘GreaseNinja®’ B-Rag® 1. The ‘GreaseNinja®’ B-Rag® is designed for cleaning one to three chains depending on the degree of chain foulinga. After each use, wipe debris / cleaner off of Brush Rag with cloth, allow to dryb. When Brush Rag begins to ‘shed’ bristles, properly dispose of it
2) Total time for chain cleaning is drastically reduced.